News

The machine is designed for packaging bitumen and other fast curing products to drums with open top or clovertainers. The machine operates in automatic mode. The operator only installs and removes the empty container filled with a forklift and closes the drums. Filling is performed by gravimetric method. Line feed product, including pump and valve filling, heated by a heat transfer medium. The unit can be equipped with various additional equipment, such as labeling machine, printer for printing on packaging, etc.

The unit is used for filling barrels in volume from 50 to 250 liters and IBC containers of liquid products, such as motor oil, the concentrates, solvents, acids, aqueous solutions, etc. automatically. The main distinctive feature of the unit is Autonomous operation without operators, due to the use of the camera of technical vision, which allows you to automatically find the holes of the barrels ' necks and direct the loading rod to these necks. To ensure continuous operation of the installation, it is only necessary to bring pallets with empty barrels, remove pallets with filled ones and monitor the sufficiency of consumables. Opening, closing and sealing of barrels is also carried out automatically, without the participation of the operator.

A comprehensive line of packaging of various products provides a full cycle of preparation and production. The maximum degree of automation provides high productivity and quality at each stage of the formation of the finished product. The use of modern management tools allows you to integrate with any MES and ERP systems.

The unit is designed for placement in the hazardous area in terms of climate UHL1 according to GOST 15150-69 (outside performance). With this machine allowed packing explosive liquids such as kerosene, gasoline, various hydrocarbon-based solvents. As part of installing the pneumatic components are missing, that allows you to place the machine in outdoor environments.Drum Filling Machine ,Drum filler 50 ,100,200 , 220, 250 ltr

Automatic liquid material pails-bottling line. This equipment is used to fill pails from 5 to 45 liters with liquid products, like lubricants, mastic, paint,concentrates etc. This line can load the product both above and below the liquid level. Filling below the liquid level can help avoiding foaming and airborne product mixture formation. Filling above the liquid level may be accompanied by the raising the dosing nozzle with monitoring the level in the container.

Automatic pallet/tray stack packer is intended for stacking finished products in drums, pails, canisters, boxes, bags etc., in specified order and with high precision and performance. Automatic pallet stack packer is intended to optimize feeding pallets to the conveyor for stacking finished products on them.

Automatic filling line for liquid materials in cans. The equipment is used to fill cans with a volume of 1 to 5 liters with liquid products, such as lubricants, mastics, paints, concentrates, etc. This line can load the product both above and below the liquid level. Filling below the liquid level can help avoiding foaming and airborne product mixture formation. Filling above the liquid level may be accompanied by the raising the dosing nozzle with monitoring the level in the container.

Using a 5-gallon pail filler is a simple process, but it requires proper setup and operation to ensure accurate and spill-free filling. Below is a step-by-step guide to help you use a 5-gallon pail filler effectively:

Using a drum filling machine involves several steps to ensure accurate and efficient filling of drums with liquids, powders, or other materials. Below is a general guide on how to operate a drum filling machine:

Automatic drum filling station is a solution designed for 25L/ 200L/IBC single-station rocker-type filling. Its equipment is stable, efficient, has a long service life, strong complete set capabilities, high degree of automation, and simple and convenient operation. The entire line is equipped with functions such as coordinated photoelectric and interlocking devices. The technology used is at the leading level in the current industry. The entire line meets the needs of mass production, reduced staff, and integrated production.